
An AC that runs but does not cool is the most common complaint we hear in Narasaraopet summers. The good news: the cause is often simple. Here are the usual reasons, from easiest to most serious.
1. Dirty air filters
Dust-clogged filters block airflow, so the room never gets cold. Filters in a split AC can be slid out and rinsed with plain water every two to three weeks in heavy use. Let them dry fully before refitting.
2. Wrong settings
Check the remote is on Cool mode (not Fan or Dry) and the temperature is set around 24°C. A very low setting does not cool faster; it only makes the compressor work longer.
3. Dirty or blocked outdoor unit
The outdoor unit releases heat. If it sits in direct afternoon sun, is covered with dust, or is boxed in by walls, cooling drops sharply. Keep the area around it clear.
4. Low refrigerant (gas)
If the gas has leaked, cooling becomes weak and you may see ice on the copper pipes. Gas does not get "used up", so low gas always means a leak that must be found and repaired before refilling.
5. Electrical or component faults
A weak capacitor, a faulty sensor or a PCB problem can stop the compressor from running properly. These need a technician with the right tools.
When to call a technician
If cleaning the filters and checking the settings does not help, book an inspection. Please do not open the electrical panel yourself.
General guidance only. For electrical faults, always call a trained technician.
Need help with this?
Book a doorstep visit from BOBBY in Narasaraopet.



